52 models
* NOTICE: I reuploaded the correct file - uploaded wrong file earlier that could cause slicing problems * Because it had to be done. The CoronaBeholder is a particularly nasty floating bag of eyeballs. Now, it can't transmit any diseases…
Figura Beholder. Brutal trabajo de Lord of the print.
Print it in PETG for more flexiblity - or TPU if you like.
A Beholder from D&D. Scaled-up for my office at work. Because we all need to keep an eye on our desk.... (snicker) This model is a remix of my other remix... https://www.thingiverse.com/thing:3139257 Which is a remix of this original...…
My beholder sculpt plus base, submitted completely for free, under the WotC Fanart policy. This will additionally be uploaded to shapeways and is completely free to download for non-commercial use ONLY. Non commercial derivations with…
Miniature of the beholder “Xazax the Eyemonger” from the Dungeons and Dragons Adventure “Out of the Abyss”. Details : The miniature comes in a total of 22 parts for easier printing and painting Also included is a combined version that…
Beholder remix from from briteminis Thank you to them for providing the original model! Category: Sculptures
The beholder was so much smaller in the first two editions with a diameter range of 4-6 feet. They only have Keratinous plates in AD&D with no mention of them in Basic D&D and none in 2nd Ed AD&D either. I have included two sizes with one…
Model of an Eye Monger monster from Dungeons and Dragons Spelljammer. This model is approximately 2 inches in diameter at its default scale. It is designed to be printed on a FDM printer without the need for support. It is printed in…
A pretty nasty monster that you are not likely to come across because your brain melts before you can even get close. Tree Supports on build plate only Partially Powered by image-to-3D from MakerWorld…
A Zombie Beholder. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
There's times where you just can't seem to keep an eye on those pesky prints. Well, let this Beholder do that for you. Prints without any supports. The only thing you're going to need is some glue or other sticky thing to mount the peg on…
“Behold My Brain Beholder STL file” is unofficial Fan Content permitted under the Fan Content Policy. Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast. ©Wizards of the Coast LLC.” This…
Print the iconic monster, reaching all the way back to the first edition of Dungeons and Dragons, the beholder has challenged parties for decades. Now it is your turn. Designed to be printed in two parts without supports. I printed in…
I wanted some Dungeons and Dragons-themed studs for @MagnumDanger's giant LEGO holiday wreath, so here is a Beholder (or Death Tyrant, if you're nasty). Printed this with supports (many of them!!) and finished off with acrylic paints.…
FOR PRIVATE USE ONLY I make one mini every week! Check out my Patreon for the commercial license, discounts and full access to my growing library of multicolor, support-free miniatures. Use code C2LTS for 20% off your first month. Terrify…
Beholder dnd tabletop miniature Category: 3D Printing
A simple holder for your probes (multimeter or oscilloscope). Fits to your wall (with a single screw) or you use adhesive tape and place it directly on your workbench. Have fun! @tstoegi Print instructions Category: Electronics Summary A…
I saw a drawing of the this thing quite a while ago on Reddit. I was in the mood to do a quick goofy remix and I had downloaded the model this is a remix of when I first saw a picture of it. After I made this I looked at the original…
Replacement for the 13mm Gardena Tubeholder - Ground pin which is phased out and not for sale anymore. It is a perfect fit for the old style sprinkler t-joint. Print in PETG for best result / strength. Many thanks for the original design.
Yet another DICE TRAY, 7 POCKETS, BEHOLDER THEMED TOP to personalize for your character interest. The tray measures nearly 8 inches across and the center ring measures 5-1/2 inches to roll your dice in. I have not printed yet but I…
Top mounted PTFE tubeholder for injection spoolholders that came with MMU3. This is a remix of two models The PTFE holder clip for the Prusa MMU (PTFE-holder-INJ-R3.stl) The arm and clip from Vincent Groenhuis's “Universal Auto-Rewind…
Beholder in 28mm scale optimized for FDM printing. It is large creature with 2 inch base. Print him on his back, this way he will be supportless (exactly as oriented in .stl) and glue him to the base. If you like what I do and want to…
The source marked this model as adult content.
Iconic Twilight Zone Characters - Eye of the Beholder - 1959-1964
Beholder from Dungeons & Dragons. Modeled in Shapelab VR.
A beholder inspired soda can koozie. Fits standard sided cans.
This model is just a quick tech demo, to show you how easy it is to make a good looking mini with 0 3D modeling skills. This beholder took me about 10 minutes to make. If you want to make your own mini, here's a quick tutorial on how to…
Here comes another beholder for all of you D&D players. It has been printed on a Mono 2 using water washable resin, but i guess it will print fine on an FDM printer using the right support settings for the tentacles.
Printed Maw and eye so your vacuum looks like Beholder monster. It's made primarily for Roborock S7, but will fit some other Roborock models as well as some vacuums of other brads, especially with scaling. Printing Setup filament switch…
This is very much a work in progress, so come back and ill have more done. this is my beholder demagorgon mashup for my d&d group, now please roll initiative. lol this is the best iv got for now. hope you enjoy. oh and the last on in here…
A 10 eyed beholder. Prints with a flat bottom to mostly avoid rolling and need for supports.
I love this anxiety ridden ball of eyes If you want to help me keep making free models or want to tell me what I should make next please check out my Patreon
A loveable, and slightly terrifying, giant conjoined beholder for your fantasy RPGs and tabletop wargames. nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training…
My attempt to create a Beholder for RPGs. You may need to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
A large beholder with a flying base for your tabletop fantasy RPGs and wargames. nonPareil institute is committed to building better futures for adults with autism through technical and work-readiness training and social engagement…
A single large eye-beast / beholders for your tabletop role-playing games and miniature wargames. One or more textures on the bases presented in this pack of these 3d models have been created with photographs from Textures.com. These…
This is another in a series of color mix experiments with translucent filament. This uses red, yellow, and blue translucent colors to build up the layers to make all the color variations. I used Google Gemini to create the black and white…
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
My attempt to create a beholder for RPGs. You may need to resize this model to fit your needs. Because of the model's detailed nature, it may also have thin parts. I recommend resin printing it. If you choose to print it with filament,…
An easy redesign to add a holder for the 2 tubes for the rackroller.
This is a tubeholder replacement i made for work because the original one got lost somehow. The vacumecleaner in the picture is a Nilfisk vacumecleaner, but i think this part will fit most vacume cleaners. I printed the part in petg…
Статуэтка из игры Beholder 1. Поддержки нужны, размер костюма перед надеванием! ссылка на игру https://store.steampowered.com/app/475550/Beholder/?l=russian
Classic D&D beholder — a floating eye monster with tentacles and a huge central eye. Perfect for tabletop games, RPG campaigns and collector displays. STL file, resin print, sizes S/M/L. Free! STL (source model, high detail) included.…
This is another in a series of color mix experiments with translucent filament. This uses red, yellow, and blue translucent colors to build up the layers to make all the color variations. I used Google Gemini to create the black and white…
Model of an Eye Monger monster from Dungeons and Dragons Spelljammer. This model is approximately 2 inches in diameter at its default scale. It is designed to be printed on a FDM printer without the need for support. It is printed in…
A weird and wonderful game where you … well your goal is to… it's kind of hard to explain. Grab a beholder. See how many other beholders you can pull out of a bucket (or any container will do really) and voila. The more optomorphs you…
So you grabbed the five basic entry level Beholders and that just wasn't enough? Well rest easy intrepid wizard, because here are ten more unique Beholders along with the last Beholder containment device you will ever need: The Blessed…
Looking for more Beholders to completely your set? Well you've come to the right place. Ten more horrifying optomorphs to print, enbucket and ultimately conquer. If you have an active commercial license you can sell the prints, not the…
Bring your tabletop adventures to life with this exceptional Beholder miniature. Crafted with intricate detail, Beholder is perfect for adding a touch of character and immersion to your campaigns. TESTED AND READY TO 3D PRINT. You'll…
![Handsome Beholder [Remix]](https://media.printables.com/media/prints/342501/images/2921000_d3d8b166-8955-4c9b-a674-c21393f8feda/large_display_img_00272_342501.jpg)
![Vacuum Beholder [Roborock S7]](https://media.printables.com/media/prints/575d5db0-f7d4-430d-84eb-0d93e9d834d5/images/10660551_4259933a-dcd1-42fa-a85b-40f981d08641_1ea3039f-3839-482c-9743-d66c72258c3e/img_9801.jpeg)
