1 / 1
FITTINGS | Female2Male Thread Adapters G 1/4" –G 1" — image 1

FITTINGS | Female2Male Thread Adapters G 1/4" –G 1"

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Twenty female-to-male G (BSPP, ISO 228) adapters, every combination from G 1/4" to G 1". Prints without supports.

Rating
5 / 5
Likes
19
Downloads
104
Makes
2
Views
279
Reviews
1

Updated at source:

Model information

License
Standard Digital File License

Female-to-male adapters for BSP parallel threads (G, ISO 228) from G 1/4" to G 1", in every combination: 10 reducers and 10 enlargers. Typical uses are garden hoses, taps, pumps and rain barrels.

Please don’t scale the parts. The threads follow ISO 228 and are made to fit standard fittings.

These adapters are not compatible with NPT threads.

Have fun!

Also available:

Update

  • Outer hex instead of internal hex: The wrench now sits on the female sleeve.

  • Full flow: The bore no longer narrows for a hex key.

  • Strength check: Six enlargers got a larger hex, and the bore is limited where strength requires it.

Adapters

Read the arrows from female to male.

Group (female)

Adapter

Wrench size

Min. bore

G 1/4"

G 1/4" → G 3/8"

19 mm

7.0 mm

G 1/4" → G 1/2"

19 mm

7.0 mm

G 1/4" → G 3/4"

22 mm

7.0 mm

G 1/4" → G 1"

27 mm

7.0 mm

G 3/8"

G 3/8" → G 1/4"

22 mm

6.2 mm

G 3/8" → G 1/2"

22 mm

10.0 mm

G 3/8" → G 3/4"

24 mm

10.0 mm

G 3/8" → G 1"

30 mm

10.0 mm

G 1/2"

G 1/2" → G 1/4"

27 mm

6.2 mm

G 1/2" → G 3/8"

27 mm

9.7 mm

G 1/2" → G 3/4"

27 mm

14.5 mm

G 1/2" → G 1"

30 mm

14.5 mm

G 3/4"

G 3/4" → G 1/4"

32 mm

6.2 mm

G 3/4" → G 3/8"

32 mm

9.7 mm

G 3/4" → G 1/2"

32 mm

13.3 mm

G 3/4" → G 1"

36 mm

19.0 mm

G 1"

G 1" → G 1/4"

41 mm

6.2 mm

G 1" → G 3/8"

41 mm

9.7 mm

G 1" → G 1/2"

41 mm

13.3 mm

G 1" → G 3/4"

41 mm

18.9 mm

Flat washers

You need one washer for each female thread: one on the floor of the adapter’s female thread and one in the fitting that takes the male thread.

Thread

Washer (OD × ID × thickness)

Max. washer OD in adapter

G 1/4"

11 × 6 × 1.5 mm

12.0 mm

G 3/8"

14 × 8 × 1.5 mm

15.6 mm

G 1/2"

18.5 × 12 × 2 mm

19.3 mm

G 3/4"

24 × 17 × 2 mm

24.8 mm

G 1"

29 × 18 × 2 mm

31.0 mm

Recommended Material

Part

Material

Adapter

PETG, ASA, ABS

Print Settings

Setting

Value

Layer height

0.15 mm

Perimeters

4

Top / bottom layers

5

Supports

None

Infill

40% or more

Part cooling fan

Low (max. 30%) for good layer adhesion

Print Orientation

Part

Orientation on the bed

Adapter

Upright, male thread down

Use

  1. Place a flat washer in the female fitting that takes the male thread.

  2. Screw the male thread in by hand. Tighten with the wrench on the hex, max. 1/4 turn.

  3. Place a flat washer on the floor of the adapter’s female thread.

  4. Screw the other fitting into the female thread by hand until the washer seals.

Don’t use thread tape on the end faces. These adapters seal against the washer, not in the thread.

Safety note:

Printed adapters are meant for low-pressure water such as garden hoses, rain barrels and pumps.

  • Don’t use for gas, hot water, drinking-water installations or permanent mains pressure.

  • Don’t over-tighten: a long wrench can twist off any plastic adapter.

Tags