BMW E21 Raydot Mirror Mounting Plates
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Classic Raydot mirror mounting plates for the BMW E21. Adapts vintage round mirrors using 2 heat-set inserts.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Bring that iconic 1960s and 70s European roadster and sports car look to your retro 80s BMW E21! These custom-designed 3D-printable mounting plates allow you to cleanly mount classic Raydot-style round mirrors directly onto the factory E21 mirror triangle geometry.
Features
Designed specifically to fit the OEM E21 mirror triangle mounting points.
Adapts classic round Raydot mirrors onto an 80s chassis for a timeless motorsport look.
Clean fit, matching the car's original trim lines.
Hardware Needed
2x Heat-Set Inserts (per plate, as shown in photos)
OEM mounting hardware/screws for the door triangle
Bolts to secure your Raydot mirrors to the new adapter plates
RTV Silicone (optional, recommended around the perimeter edge for weather sealing against rain)
Print Settings & Recommendations
Material: ASA or ABS is strongly recommended for UV and temperature resistance since these sit right out in the elements. PETG is a good alternative.
Orientation: Print flat with the mounting side facing up.
Perimeters/Walls: 3 to 4 walls for optimal strength around the heat-set inserts.
Infill: 20% to 40% (Grid, Gyroid, or Cubic).
Happy building, and make sure to share photos of your E21 with the classic setup!