COMX-35 / PC1 expansion card box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Those who still own a COMX-35 or PC-1 and have a broken expansion casing, are designing some form of expansion card or…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Those who still own a COMX-35 or PC-1 and have a broken expansion casing, are designing some form of expansion card or building one from AVI (www.comx35.com) now can print a new one with a 3D printer. Slightly adjusted to make printing better :
- Side are now straight because it is not spray molded anymore
- Both bottoms are flat to prevent hanging of filament
- Pins inside the lid are thicker to prevent breaking off
- Side lockers have extra back plate to prevent breaking off
- COMX logo is not deep enough still, will post a revised one later.
Print Settings
Printer:
Anet A8
Rafts:
No
Supports:
No
Resolution:
0.12 mm
Infill:
20%
Notes:
No supports needed. Print laying on top of lid and bottom of bottom.
Speed 50 mm/s
Layer thickness 0.12 mm
First layer 0.08 mm
Extruder head 0.4 mm
Extruder temp 200 degrees celsius
Heatbed 55 degrees celsius
How I Designed This
My father-in-law,John Heggen (www.anjobest.hobby-site.com) made this from the original with Solidworks so all the credits for the design go to him !
Category: Electronics