1 / 5
Sport Bike Kit - Superbike-Style Motorcycle with Working Steering, Spinning Wheels & Side Stand — image 1
1 / 5

Sport Bike Kit - Superbike-Style Motorcycle with Working Steering, Spinning Wheels & Side Stand

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A 1:10 superbike-style motorcycle kit with working steering, spinning wheels and a side stand. No glue.

Rating
0 / 5
Likes
2
Downloads
10
Makes
0
Views
49
Reviews
0

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial

A modern superbike-style motorcycle you build yourself, at about 1:10 scale (200 mm long, 100 mm tall). An original design with no brand logos.

WORKING PARTS

  • The inverted fork steers, with a natural steering lock at about 30 degrees each way

  • Both wheels spin: 5 split-spoke cast rims with twin drilled front discs, a rear disc and a sprocket

  • The side stand folds down to park and swings back up

DETAILS

  • A twin-spar beam frame with an inline-four engine, cooling fins, exhaust headers and collector, a radiator and a mono-shock

  • A nose cowl with twin headlights, a central air intake and a windscreen area ready to paint smoke-black

  • Side fairings with race-number ovals, and a tank / seat / tail unit with a fuel cap and tail light

  • An inverted fork with radial calipers, clip-on bars and a dash

  • A braced swingarm and a short side silencer

  • Everything is printed: no glue, screws or springs. Parts plug together with printed pins and pegs

PRINT SETTINGS

  • The 3MF is ready to print with 4 plates: 0.16 mm layers for large parts, 0.12 mm for rims and small parts, 0.4 mm nozzle, 3 walls, 15% gyroid infill, no supports

  • Pins, axles, washers and side stand: 100% infill (already set in the 3MF)

  • Detect thin walls is ON for the fine details

  • Plates are grouped by colour: chassis (white), bodywork (gold), rims and pins (white) + tyres and fenders (swap to black), fork/swingarm/silencer (gold)

  • TPU tyres work great, PLA works too

  • About 100 g of filament. Largest part 119 x 77 mm, fits any common printer

ASSEMBLY

  1. Chassis + fork: lay the left chassis half inside up, lay the fork's steering stem into the half head tube (bottom clamp below, top clamp above), push 5 joining pins in and press the right half on. The fork is now captured and steers.

  2. Swingarm: open its arms slightly and snap the pivot holes over the two pivot pegs behind the engine.

  3. Wheels: push two rim halves into each tyre (front: two disc halves; rear: sprocket half left, disc half right). Front wheel between the fork legs with the short axle pin; rear wheel between the swingarm arms with a washer each side and the long pin.

  4. Front fender: hold the halves together over the tyre and spread the fork legs slightly so the pegs click into the fender.

  5. Side panels: press each onto the 3 pegs on its side of the engine. Nose cowl: lower it onto the two pegs at the front of the panels.

  6. Tank / seat / tail: pin the halves together (3 pins) and press onto the frame and subframe pegs.

  7. Silencer: press onto the peg under the engine, on the right. Side stand: clip onto the peg on the left.

TIPS

  • Pin or peg too tight? Sand it lightly. Joining pins loose? Print them at 103%

  • Turn the bars gently: the steering stops on its own at about 30 degrees

Original design by Kirimas Studio.

Tags