1 / 3
Prusa MK3S Y axis motor holder with double shear — image 1
1 / 3

Prusa MK3S Y axis motor holder with double shear

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Stiffer mount for y axis motors, including the possibility of making a double shear setup.

Rating
0 / 5
Likes
2
Downloads
7
Makes
0
Views
45
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution
  1. Stock motor shafts are quite short and I switched to 17HE19-2004S from OMC, which shafts are longer by I believe a few mm.

  2. Print it in ASA/ABS, or any high-temp resistance and high-rigidity filament. Some formulas of tough/high-temp PLAs could also work. Printing recommendations are the same as for Vorons, 5 walls, 5 bottom and top layers, from 40 to 50% infill (gyroïd). I personally printed it angled at 45° for extra structural strength.

Tags