Enchanted Vine Mason Jar Stand – 3 Tiers, 12 Jars (Bolted, No Glue)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three-tier vine-and-root stand for 12 Ball 8 oz wide-mouth jars. Bolted with M4 screws, swappable nameplates.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Standard Digital File License
A three-tier stand that looks grown, not built: twisting vines and roots carry 12 Ball 8 oz wide-mouth jars – honey, spices, loose-leaf tea, candles, sweets or coffee beans. Made for a shop counter, looks just as good on a kitchen shelf.
Highlights
12 jars on 3 tiers, 4 per shelf. Each jar lifts out forwards or backwards without touching the frame.
Bolted, not glued: every joint is a printed key or square pin clamped by an M4 screw from below. Comes apart flat for moving or shipping.
7 swappable nameplates – HONEY, SPICES, CANDLES, TEA, TREATS, COFFEE and a blank one. Two-colour inlay printed face down for crisp lettering; slides into the front root.
5 leaf sockets along the vines. The bud caps close them for a clean look; all sockets share one simple peg standard, so add-on leaf packs can follow.
Every part fits a 250 × 210 mm bed (MK4 / Core One) and lies in its strongest orientation.
Printed and assembled before release (Bambu Lab P2S, PETG-GF).
Size: 578 × 371 × 242 mm (W × D × H)
Jars: Ball 8 oz wide-mouth squat jars (body Ø95 mm, lid Ø87 mm). Other jars with the same body size should fit too.
You'll need
36 × M4×12 socket head cap screws (DIN 912 / ISO 4762)
36 × M4 hex nuts (DIN 934)
3 mm hex key (a ball end helps)
About 1.6 kg PETG or PETG-GF for the frame, plus a little gold (or any contrast colour) for the nameplates
Printing
Tested with a 0.6 mm nozzle and 0.3 mm layers in PETG-GF; a 0.4 mm nozzle with 0.2–0.25 mm layers works too.
Use supports from the build plate only, and keep them out of key pockets, holes and sockets (use support blockers / enforcers in your slicer).
Print the keys and pins first and test the fit – they should slide in by hand.
Nameplates: green body + gold inlay files share the same origin – load both as one multi-part object (gold face down in the first layers).
The 7 large roots and vines are 3MF files (same mesh as STL, just compressed) – open them in any slicer.
Assembly
Build two side frames and three shelves flat on the table, slide the shelves onto the left frame, push the right frame on, then tighten in this order: vine–vine → key-to-vine → shelf screws. The illustrated 6-page PDF guide is in the files.
Designed by Layer 3D Studio, Pattaya. If you print one, please post a make – and tell me which leaf pack you'd like next.
