1 / 7
silent 3 bladed prop -  I got the equation curves down in inventor. — image 1
1 / 7

silent 3 bladed prop - I got the equation curves down in inventor.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Uppdate 29.11.15 Added 9X4.5 blade sett, (Prop4) i hadent done this for a while so i hope i got it right. I finally…

Rating
0 / 5
Likes
4
Downloads
72
Makes
0
Views
327
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Uppdate 29.11.15

Added 9X4.5 blade sett, (Prop4) i hadent done this for a while so i hope i got it right.

I finally got the equation curves in inventor all set, if somone wants a spesific airfoil profile let me know.

This has less tip turbulence and makes a lot less noice

I use it as a silent replacement for 5-7" props for my quad.

3 mm axel

print as solid.

I print it on hight resolution and treat it with acetone vapour

I have upploaded an inventor file with a naca profile equation curve, feel free to make any wing profile by simply tweeking the numbers.

Instructions

Equation curve in inventor.

thickchordt5(0.2969sqrt((1 in)/chord)-(0.1260t1 in)/chord-(0.3516t^31 in^2)/(chord^2 )+(0.2843t^51 in^3)/(chord^3 )-(0.1015t^7*1 in^4)/(chord^4 ))

where:

• c is the chord length,

• x is the position along the chord from 0 to c,

• y is the half thickness at a given value of x (centerline to surface), and

• t is the maximum thickness as a fraction of the chord (so 100 t gives the last two digits in the NACA 4-digit denomination).

You need to add chord and thick as variables in inventor (the fx button) before compiling the equation curve,

PS ! The part file mustbe in inches!!!!!!

The foil must be made in 2 sections one for the top curve and one for the lower just add "-" in front of the lover airfoil curve.

Category: R/C Vehicles

Tags