Hemisphere for Product Enterprise RC Dalek
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable replacement hemisphere for a 12 inch Product Enterprise RC Dalek
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
I made this printable replacement hemisphere for a Product Enterprise RC Dalek as my one had 2 of them missing. I recommend printing it on its side with a raft on the bottom (as otherwise it breaks off the built plate when printing) and supports as otherwise the clips would be floating. I print these with a 0.4mm nozzle. I used PETG for my print although I imagine PLA would work fine too.
Post Print
The part can be easily removed from the supports and raft when complete. If you want it to blend in with the other hemispheres of your Dalek you will of course need to sand it down and then paint it with the colour relevant to your Dalek. I haven't got to this stage yet myself.