Hemisphere for Product Enterprise RC Dalek
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable replacement hemisphere for a 12 inch Product Enterprise RC Dalek
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this printable replacement hemisphere for a Product Enterprise RC Dalek as my one had 2 of them missing. I recommend printing it on its side with a raft on the bottom (as otherwise it breaks off the built plate when printing) and supports as otherwise the clips would be floating. I print these with a 0.4mm nozzle. I used PETG for my print although I imagine PLA would work fine too.
Post Print
The part can be easily removed from the supports and raft when complete. If you want it to blend in with the other hemispheres of your Dalek you will of course need to sand it down and then paint it with the colour relevant to your Dalek. I haven't got to this stage yet myself.