Colour Seperated CC2 Drybox doors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simply takes the door parts from Christopher Lee's Dry Box and separates the coloured parts for less wasteful purging.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 67
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Door parts for Christopher Lee's CC2 Drybox, with coloured sections seperated out to be superglued in.
These parts are nearly identical to Christopher Lee's original parts. The only major changes are that I have separated the differently coloured sections of the door plates making the print much less wasteful in terms of purging. Also changed the font of the numbers to banschrift to match the Elegoo cc2 type style.
Overall probably takes a little less time than the original due to the purge times being eliminated and is obviously much more waste efficient.
Use small amounts of superglue for binding the colour sections to the doors. overdoing it will cause spillage which may require sanding. If sanding is required then rub IPA over the sanded surface when finished to clean the colour up.
All you need to assemble the door panels is Superglue and some M4x14mm self tapping screws as advised by manual.