Caliper Check Card – Free 3D Printer XY & Hole Accuracy Test (GarsideWorks)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 100 x 40 x 3 mm card for a quick check of your printer's XY size and hole accuracy using any caliper. Free, CC BY 4.0.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
A 100 x 40 x 3 mm card for a quick check of your printer's XY size and hole accuracy using any caliper:
Outer steps: 10, 25 and 50 mm (outside jaws)
Slots: 5, 10 and 20 mm wide (inside jaws)
Holes: 3, 5, 8 and 10 mm (inside jaws)
Overall length: 100 mm
Every feature except the 100 mm edge has a raised bold label showing its nominal size.
Print settings: PLA, 0.2 mm layers, 100% infill, no supports. Print flat as supplied, labels up. Estimated ~12 g and 20–25 min (hand estimate, not sliced). Let the card cool before measuring.
How to read the results
A hole or slot measures under nominal (for example, the 5 mm hole reads 4.8 mm): oversize holes in your models by that amount (+0.2 mm), or use your slicer's hole/XY compensation.
The outer steps measure over nominal: lower outer-wall XY compensation by the measured excess, then reprint and re-measure.
The 100 mm length is off: check belt tension and steps/mm.
Measure each feature 3 times and write down the average. The card shows your printer's own offset.
Licence: CC BY 4.0. Free to share and remix with credit to GarsideWorks.
More repair tools from GarsideWorks: https://whop.com/garsideworks/