1 / 3
Caliper Check Card – Free 3D Printer XY & Hole Accuracy Test (GarsideWorks) — zdjęcie 1
1 / 3

Caliper Check Card – Free 3D Printer XY & Hole Accuracy Test (GarsideWorks)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 100 x 40 x 3 mm card for a quick check of your printer's XY size and hole accuracy using any caliper. Free, CC BY 4.0.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
13
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution

A 100 x 40 x 3 mm card for a quick check of your printer's XY size and hole accuracy using any caliper:

Outer steps: 10, 25 and 50 mm (outside jaws)

Slots: 5, 10 and 20 mm wide (inside jaws)

Holes: 3, 5, 8 and 10 mm (inside jaws)

Overall length: 100 mm

Every feature except the 100 mm edge has a raised bold label showing its nominal size.

Print settings: PLA, 0.2 mm layers, 100% infill, no supports. Print flat as supplied, labels up. Estimated ~12 g and 20–25 min (hand estimate, not sliced). Let the card cool before measuring.

How to read the results

A hole or slot measures under nominal (for example, the 5 mm hole reads 4.8 mm): oversize holes in your models by that amount (+0.2 mm), or use your slicer's hole/XY compensation.

The outer steps measure over nominal: lower outer-wall XY compensation by the measured excess, then reprint and re-measure.

The 100 mm length is off: check belt tension and steps/mm.

Measure each feature 3 times and write down the average. The card shows your printer's own offset.

Licence: CC BY 4.0. Free to share and remix with credit to GarsideWorks.

More repair tools from GarsideWorks: https://whop.com/garsideworks/

Tagi