1 / 1
Dowel Jig 18 mm board, 8 mm dowel, 3x32 mm — image 1

Dowel Jig 18 mm board, 8 mm dowel, 3x32 mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Self-centring dowel drill jig for 18 mm boards, 8 mm dowels, three holes at 32 mm spacing.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
11
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

The fences straddle the board, so the holes always land on the centreline. The board thickness, dowel diameter, number of holes, spacing and clearance are fixed in this free file. Optionally, ream the holes or press in brass tubes so they last longer.

Print: PETG or PLA+, 0.2 mm layer, 5 walls, 40% infill, printed top-face down with no supports.

Measure your original part first. Not for parts carrying load, pressure, heat or electricity. Print a fit test before the full part.

Tags