1 / 1
Dowel Jig 18 mm board, 8 mm dowel, 3x32 mm — zdjęcie 1

Dowel Jig 18 mm board, 8 mm dowel, 3x32 mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Self-centring dowel drill jig for 18 mm boards, 8 mm dowels, three holes at 32 mm spacing.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
11
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

The fences straddle the board, so the holes always land on the centreline. The board thickness, dowel diameter, number of holes, spacing and clearance are fixed in this free file. Optionally, ream the holes or press in brass tubes so they last longer.

Print: PETG or PLA+, 0.2 mm layer, 5 walls, 40% infill, printed top-face down with no supports.

Measure your original part first. Not for parts carrying load, pressure, heat or electricity. Print a fit test before the full part.

Tagi