1 / 2
Desk Cable Grommet 60 mm Hole - Sleeve and Slotted Cap (PLA/PETG)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two-part desk cable grommet for a 60 mm hole: sleeve plus slotted cap, printable in PLA or PETG.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A desk cable grommet for a 60 mm hole: a sleeve plus a slotted cap (cap file included as model_cap.stl).
Print settings: PLA or PETG, printed flange down.
Before you print: measure your original part first and print a quick fit test. Not for parts carrying load, pressure, heat or electricity.
Licence: CC BY-NC-ND 4.0, personal non-commercial use.