1 / 2
Desk Cable Grommet 60 mm Hole - Sleeve and Slotted Cap (PLA/PETG)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two-part desk cable grommet for a 60 mm hole: sleeve plus slotted cap, printable in PLA or PETG.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 5
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A desk cable grommet for a 60 mm hole: a sleeve plus a slotted cap (cap file included as model_cap.stl).
Print settings: PLA or PETG, printed flange down.
Before you print: measure your original part first and print a quick fit test. Not for parts carrying load, pressure, heat or electricity.
Licence: CC BY-NC-ND 4.0, personal non-commercial use.