DNT DigiMicro Camera Housing Milling Machine mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.40 – €6.61 net (excluding VAT)
For file: 20261029_Camera_Set-V1_0.4n_0.15mm_PETG_MK4S_5h51m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.01 excluding VAT (range midpoint).
- Weight reported by the author
- 84 g
- Print time reported by the author
- 5.85 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Gehäuse für DNT DigiMicro Kamera für an die CNC Maschine
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hier ein Modell um meine Alte DNT MicroDigi 1.3 Mikroskop Kamera wieder zu verwenden und an meiner Fräse zu montieren um das Anfahren zu vereinfachen.
Hierfür muss die originale Kamera zerstört werden, was bei mir bereits der Fall war :-)
Ihr braucht die Platine mit der Fotolinse, das Objektiv, den silbernen Verstell Ring sowie das originale USB Kabel. Zur Montage braucht Ihr 4 Schrauben M3x25mm sowie Ein Kabelanschluss zur Zugentlastung.
Gedruckt habe ich das Gehäuse aus PETG CF.
Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like freuen.
Here's a model for reusing my old DNT MicroDigi 1.3 microscope camera and mounting it on my milling machine to simplify setup.
For this, the original camera has to be destroyed, which I've already done :-)
You'll need the circuit board with the camera lens, the objective lens, the silver adjustment ring, and the original USB cable. For mounting, you'll need four M3x25mm screws and a cable connector for strain relief.
I printed the housing from PETG CF.
Have fun printing! If you like the model, I would be happy if you leave me a like.