Innovate Now, Case Later - Synaptics Coralboard SL
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A minimalist, open-frame carrier for the Coralboard SL, protecting the board while keeping ports accessible.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Print less! Build more!
When I pick up a development board, I want to work on the project: connect sensors, test a camera, wire a header, and try an idea. The carrier took me 20 minutes to print and requires no additional materials like screws or lid. The design is practical giving me a protective case that rigidly holds the board in place.
This open carrier for the Synaptics Coralboard SL keeps the electronics visible and accessible. A rounded perimeter gives your fingers a plastic edge to grip, while the base supports the board above the bench. Raised wall sections sit around available edges, with openings for connectors and controls. The open top leaves room to reach headers and work with expansion hardware; underside windows keep the design light and allow access from below.
Why it is open?
There is no lid to remove each time the wiring changes. You can see the board, follow a cable, and check connections while developing. Material is concentrated in the perimeter and base ribs instead of filling a solid enclosure. The goal is a practical bench companion that gets out of the way of the actual project.
Printing and assembly:
Print the carrier with its flat base on the bed. Actual print time depends on the printer and profile. On a standard ender 3 pro 0.2 nozzle was able to achieve under 25 min prints.
No lid, inserts or board screws are required by the intended clip based assembly. With power disconnected, align the board with the connector openings and gently seat it on the edge supports. Do not force a tight fit and start with the back edges furthest from the usb ports as these are stiffer than the front tabs. Check print tolerance and clearance first. Retention must be tested on your printed part before carrying or moving the assembly. Mounting holes in the base are optional; wall mounting requires suitable separate fasteners and clearance checks.
Protection and limits:
The raised plastic edges are intended to reduce incidental contact with the PCB and provide a surface to handle. The open frame cannot prevent every short, drop or impact. Drop resistance, retention strength, heat performance and physical connector/adapter fit have not yet been validated. Keep loose metal, tools and conductive surfaces away from the exposed electronics.
STL: carrier only, millimetres, ready to open in your slicer.
Board geometry used for fit reference: official Synaptics Coralboard SL model by Coral, https://www.printables.com/model/1859306-synaptics-coralboard-sl. The board shown in renders is reference hardware, not part of the printable carrier.
The aim is simple: spend less time enclosing the development board and more time developing with it.
License
CC BY-NC-ND: you may share the unchanged files and print the carrier for noncommercial use with attribution. You may not distribute adapted versions of this model. Private modifications are allowed by this license. You are welcome to study the approach and independently design your own carrier; this license does not claim ownership of general ideas or functional principles. For commercial use or permission to share a modified version, contact the creator.