Murphy Dual Solar Mesh Build v1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mesh build using a build that @Greasemonkey945 made as a base.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Parts Guide, see tab entitled "Murphy Dual Solar Mesh Build v1":
https://docs.google.com/spreadsheets/d/1QjOS8yVAp03dNzIBj91FvwC6CMx6JNkfPckLuhaf2bo/edit?usp=sharing
Important: Print test fit parts with PLA/PETG for cost reduction, only print in ASA when you are ready for final fit!
Notes:
Final prints need to be 50% infill with 5 walls, 5 layer top and 5 layer bottom at .2 layer lines.
Anything marked as [Internal] is either a test-piece or something that will not be exposed directly to the elements, so they can be printed in PLA/PETG.
Anything marked as [Supports] need supports.
This build is designed for 8.66"D x 6.69"W x 4.33"H sized outdoor enclosures.
Solar arm is for the build by KyleMakeStuff to replace the original mount:
https://www.thingiverse.com/thing:6831867