49mm Lens Hood with threads-Wide Angle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lakqtHH3Esh
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 114
- Makes
- 0
- Views
- 598
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Share Alike
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lakqtHH3Esh
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Yes
Supports:
No
Resolution:
.16
Infill:
20
Filament: eSun PETG Black
Notes:
This is a lens hood with 49mm threads. I am using it for a Vivitar 28mm f2.8 wide angle on a Pentax K1000. Print the Lens Hood with the Threads up, so there is no distortion if you use a brim for stabilization. I used a Brim. I printed it in .16 but it will also work at .20 I used eSun PETG at 230-240C and a 70C bed temp. This eSun PETG will print good for me at low as 229C on an Creality Ender 3 Pro. I printed it at a speed of 30, and retraction of 4.0 and 45. This is a 20% infill.
If you do design your own lens threads, use 4 to 5 threads at 0.75 pitch and a thread angle of 0.60
If you are printing it and it gets “stringy”, reduce the temperature of the nozzle.
Good Luck :)
Greg
Category: 3D Printing