Annoying gift tube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gift box with annoying opening mechanism
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 2
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Really annoying gift box that fits iPhone box(inner diameter 101mm, 181mm height). You have to synchronize two worm screws to rotate the lid along a regular thread. It takes roughly 5 minutes to open. Worth every second of print time.
Fits 180x180mm beds
Tools needed
8.7mm drill bit
Hardware needed
M5x10-20mm SHCS - 4pcs
Recommended print parameters
Minimum filament: PLA
Recommended filament: PETG
First layer height: 0.2mm
Layer height: 0.2mm - worm gears can benefit from printing at 0.12mm LH
Perimeters: 2-3
Bottom/top layers: 4-5
Infill: 10%
Brim: no
Supports: no
Assembly
Carefully drill out the 4 bolt-head holes to 8.7 mm using a drill bit. Do this by hand to avoid damaging the printed parts.
Insert the worm gear
Screw M5 bolts into worm gear through bottom piece
Glue blank pieces to screw heads with superglue - this is optional
Insert your gift into the box
Screw the lid on with 2 worm gears
OR
Carefully drill out the 4 bolt-head holes to 8.7 mm using a drill bit. Do this by hand to avoid damaging the printed parts.
Insert the gift into the box
Screw the lid on
Insert the worm gears
Screw M5 bolts into the worm gear through bottom piece
Glue blank pieces to screw heads with superglue - this is optional