3S LiPo Hardcase
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple Hardcase for 3S LiPo Batteries commonly used in RC Models
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 250
- Makes
- 0
- Views
- 1,221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this simple Hardcase for my Softcase Zeee 3S 5200mAh LiPo Batteries because most tracks here require hardcase batteries and its safer anyway.
The case consists of two parts, a body and a lid. The lid snaps in place with 3 tabs but you can also glue it shut if you want.
I included three variations of the lid, two with a description and a number on them and one blank variant.
Update: I added a version of the case with thinner sidewalls to accomodate narrower battery trays and a cutout for the cable to prevent the now thinner sidewall from deforming due to the pressure from the cable. (LiPo_Hardcase_slim.stl)
There´s also a step file of the lid included so you can customize it to your own needs.
Everythings designed in Fusion360
I printed the whole case out of PETG to get a bit more heat resistance.
No supports needed!
If you need the cable outlets to be switched, just mirror the model of the case accordingly, the lid and the corresponding tabs are symmetrical.