Snap-in wheel center caps for MINI F55/F56/F57 – Cosmos Spoke 499
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MINI F55/F56/F57 – Cosmos Spoke 499 Center CapsParametric, snap-in replacement center caps for the 17" MINI Cosmos…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 31
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
MINI F55/F56/F57 – Cosmos Spoke 499 Center Caps
Parametric, snap-in replacement center caps for the17" MINI Cosmos Spoke 499 alloy wheel.
The caps feature spring clips for a secure fit and an engraved wheel position label:
FL / FR / RL / RR German:VL / VR / HL / HR
The OpenSCAD model is fully parametric, allowing you to adapt the fit to your individual wheels.
For the best fit, print the clip section as a test before printing the complete cap.
Customizing the Fit
The following parameters can be adjusted in OpenSCAD:
bore_d · snap_d · snap_z · fit · wall · clips · slot_w · head_d
The model also supports configurable engraved or raised position labels.
Installation
Press the cap straight into the wheel center bore until the clips snap into place. Remove carefully with a plastic trim tool.
Always verify the fit before driving and periodically check the caps for secure attachment.
Compatibility
Designed forMINI F55 / F56 / F57 with Cosmos Spoke 499 wheels.
Not affiliated with or endorsed by BMW AG / MINI. MINI and Cosmos Spoke are trademarks of their respective owners.
Print Settings
Rafts:
No
Supports:
No
Infill:
40% gyroid
Notes:
- Material: ASA or PETG — no PLA
- Layer height: 0.16 mm
- Walls: 4
- Orientation: visible side on the build plate
Category: 3D Printing