1 / 3
Snap-in wheel center caps for MINI F55/F56/F57 – Cosmos Spoke 499 — zdjęcie 1
1 / 3

Snap-in wheel center caps for MINI F55/F56/F57 – Cosmos Spoke 499

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

MINI F55/F56/F57 – Cosmos Spoke 499 Center CapsParametric, snap-in replacement center caps for the 17" MINI Cosmos…

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
31
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

MINI F55/F56/F57 – Cosmos Spoke 499 Center Caps

Parametric, snap-in replacement center caps for the17" MINI Cosmos Spoke 499 alloy wheel.

The caps feature spring clips for a secure fit and an engraved wheel position label:

FL / FR / RL / RR German:VL / VR / HL / HR

The OpenSCAD model is fully parametric, allowing you to adapt the fit to your individual wheels.

For the best fit, print the clip section as a test before printing the complete cap.

Customizing the Fit

The following parameters can be adjusted in OpenSCAD:

bore_d · snap_d · snap_z · fit · wall · clips · slot_w · head_d

The model also supports configurable engraved or raised position labels.

Installation

Press the cap straight into the wheel center bore until the clips snap into place. Remove carefully with a plastic trim tool.

Always verify the fit before driving and periodically check the caps for secure attachment.

Compatibility

Designed forMINI F55 / F56 / F57 with Cosmos Spoke 499 wheels.

Not affiliated with or endorsed by BMW AG / MINI. MINI and Cosmos Spoke are trademarks of their respective owners.

Print Settings

Rafts:

No

Supports:

No

Infill:

40% gyroid


Notes:

  • Material: ASA or PETG — no PLA
  • Layer height: 0.16 mm
  • Walls: 4
  • Orientation: visible side on the build plate

Category: 3D Printing

Tagi