1 / 1
CR-10s Pro & CR-10 Max Direct drive conversion + filament guide + unload filament protection
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The parts will replace the extruder on the left z bracket and will provided a filament guide and unload filament protect
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 58
- Makes
- 1
- Views
- 880
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
This parts can be used to utilize the existing left extruder bracket (z-bracket) and keep the setup of the filament runout sensor. It will also come with a filament guide and unload filament protection (since if you will mount the tube directly at the outlet of the runout sensor the filament will be pushed back through the sensor wich may cause some damage to the micro switch inside).
Partlist:
- 6x M3x8-10
- 4x M3x18 (will replace original runout sensor bolts)
- 4x M3 nut
- M3 washers (depending on the used bolts to compensate for length
- 1x PC4-M6 fitting
- 1x 608 bearing (you can also choose a non bearing roller, but I recommend to use the bearing)