Quad PTFE Clip

I was looking for PTFE tube clips for the tubes on the Elegoo Centauri Carbon Canvas system, and while there were some, I wasn't super happy with any of them. They either held the tubes too close to each other, held the wrong number of tubes, or were too loose fitting and didn't stay in place.

I took measurements from the clip that came with the Canvas system, and used that as my base with a couple changes. The original had 1 of the 4 in a smaller size to keep it from sliding around, so I used that and added a second with the smaller size to hold it even tighter, though I also made a design with just one like the original. I also made the center hole slightly larger, so it can also fit a tube; I want to make my own version of the filament hub at some point, so I may use this as a built-in bypass for flexible filament when I do.

This fits very similarly to how the original does, and seems to hold the tubes very securely. If you have pretty tight bends, the model with the 2 smaller holes may occasionally come unclipped, but the version with only 1 like the original should solve this.

If you want to change the design at all, you can access the cad here: https://cad.onshape.com/documents/279f863c93ef3f192de81c15/w/eb38ef3f85f9a1e31346450f/e/ead724bddb560c7780340561?renderMode=0&uiState=6ae65113f6f5aef40304b610