1 / 4
ForgeStack Divided Parts Bin 2×3 — Two-Compartment Modular Bin, Support-Free — image 1
1 / 4

ForgeStack Divided Parts Bin 2×3 — Two-Compartment Modular Bin, Support-Free

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Big two-compartment ForgeStack bin, 80 × 120 mm — baseplate drop-in, stackable, label frame. Support-free.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
8
Reviews
0

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution — Noncommercial

The big ForgeStack bin, split in two: 80 × 120 mm (2 × 3 cells), 65 mm tall, with a fixed centre divider making two 74 × 55 mm compartments — M3 bolts left, M3 nuts right; beads sorted by colour; the classic two-pile workshop problem, solved. It drops onto a ForgeStack baseplate, stacks on its own kind, and carries a raised label frame on the front.

**Print details**

- Designed for support-free FDM printing. Slicer-validated (OrcaSlicer, 0.4 nozzle, 0.2 layer, PLA) — community printing in progress: be one of the first to print it and share your make!

- Footprint 80 × 120 mm (121.2 mm deep overall including the label frame), 65 mm tall; two compartments of 74 × 55 mm, ~53 mm deep

- Four underside sockets (corner cells) drop onto baseplate pins — 0.5 mm clearance per side

- Stacks: the tapered plug base drops into the mouth of the bin below (0.5 mm clearance)

- Raised label frame on the front for a 54 × 24 mm paper label

- The ForgeStack system: every module is built on a 40 mm grid. Baseplates carry square locating pins (11 × 11 mm, 4 mm tall) at the cell centres; every bin underside has matching square sockets (12 × 12 mm, 4.5 mm deep) — a drop-in fit with 0.5 mm clearance per side, no press-fit, no hardware.

- Bins also stack: the tapered plug on the underside (51° flare, so it prints clean) drops into the open mouth of the bin below with the same 0.5 mm clearance per side.

- One honest note: the underside sockets have flat ceilings — a 12 mm bridge, crossed cleanly in PLA/PETG with normal part cooling. Print with supports OFF.

- Watertight/manifold mesh — slices clean in OrcaSlicer, Bambu Studio, PrusaSlicer, Cura

- Listing images are renders of the actual model geometry, not photos of a print — your Makes will be the first real photos

**Original design** — modelled from code, all rights reserved. The rest of the ForgeStack system is free on my profile too: baseplates in 3×2 and 4×4, bins in 1×2, 2×2 and a divided 2×3, a 1×1 pen cup module, a hanging bin and its wall rail — plus the Desk Cable Clip, the Modern Ribbed Planter Pot, the Stackable Storage Box and the Square Dice Tray. Every one of them support-free.

**License:** CC BY-NC 4.0 — free for personal use: print as many as you like for yourself and as gifts. No selling of prints, and no redistribution or sharing of the files.

Tags