Skull Wall Mounted Display / LED Backlit Accent Piece
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall-mounted LED skull display! Keyhole slot, cracked brow design, hollow LED cavity & optional Plexiglas halo backplate
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Bring a fierce, gothic glow to your wall with this wall-mounted LED Skull Display! Featuring an aggressive carved face with detailed tooth rows, deep eye sockets, and a cracked brow design, this piece casts dramatic glowing outlines day or night.
To give you complete flexibility for mounting and custom lighting setups:
Flush Keyhole Wall Mounting: The required backplate features a built-in keyhole slot designed specifically for #3 screws or small finish nails, allowing the entire piece to mount completely flush against your wall.
Plexiglas Halo Backlighting Option: For an ultra-clean halo lighting effect against your wall, swap the printable backplate for a matching piece of Plexiglas cut to the same shape and screwed onto the back using the pre-modeled mounting holes!
Originally conceptualized as a custom woodworking project, this model has been fully adapted for 3D printing with precise tolerances, hidden wire routing, and customizable lighting options. Print it as a standalone desk accent, or use it as a physical template guide for scroll saw woodworking!
Be sure to explore the rest of my lighting collection here: Illuminated Silhouette Collection
Key Features:
Flush Keyhole Wall Mounting: Features a built-in keyhole slot on the rear plate designed for #3 screws or small finish nails to ensure a completely flush wall fit.
LED Backlighting Ready: Built with a hollowed-out rear cavity so you can easily route LED strip lights behind the faceplate, projecting light forward and around the edges.
Rear Light Shield & Diffuser: Includes a matching backplate that fastens with standard hardware to pre-modeled mounting holes to direct light forward through cutaways while hiding wiring.
Plexiglas Halo Backplate Option: Can be paired with a custom-cut Plexiglas backplate to scatter a smooth halo glow onto the surrounding wall.
Woodworker Friendly: Can double as a physical template guide if you prefer cutting real wood.
Dimensions
Width: 7.23”
Height: 9.5”
Back Inset Depth: 0.1875”
Thickness: 0.375”
Print Settings
Material: PLA
Layer Height: 0.12mm to 0.20mm
Infill: 20% or higher (Gyroid or Grid).
Orientation: Rotate the skull diagonally across your build plate to fit standard print volumes flat face down.
Looking for the tabletop base edition instead of the wall mount?
Check out my companion listing here: