Ugreen X765 charger underdesk mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a underdesk mount for said ugreen charger. See description for assembly instructions!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 9
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
Print/Assembly:
I would advise to print the model with 3-4 perimeter lines to leave material for drilling/cutting.
You need additional hardware:
- 4x countersink machine screws (M3 preferably, or similar imperial), ~30mm in length for holding together the two halves
- 4x short countersink wood screws for mounting to the desk
1. Print the model 2 times (upper and lower half)
2. On the lower half, drill out the mounting holes so the screws wont bite into it (or download .step and widen before printing)
3. (optional) On the upper half, use a thread cutter to cut the thread for the M3 Screws into the mounting holes.
4. Screw upper half into the Desk
5. Assemble with charger between the halves using the m3 screws
If you have some comments for improvement, let me know!
I'll add a second body with widened holes when I get the time!