1 / 4
SKODA OCTAVIA IV – Infotainment Storage Tray with Hinged Lid — image 1
1 / 4

SKODA OCTAVIA IV – Infotainment Storage Tray with Hinged Lid

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The result is a practical dashboard upgrade that combines additional storage capacity with a clean, OEM-style appearance

Rating
0 / 5
Likes
5
Downloads
19
Makes
0
Views
216
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Share Alike

SKODA OCTAVIA IV – Behind-Screen Storage Tray with Hinged Lid

Make better use of the unused space behind the infotainment screen in your Škoda Octavia IV with this alternative version of my Behind-Screen Storage Tray.

This version is based on my original design but introduces an additional feature: an integrated hinged lid that transforms the open storage compartment into a more discreet and enclosed storage space.

The result is a practical dashboard upgrade that combines additional storage capacity with a clean, OEM-style appearance.

KEY FEATURES

  • Vehicle compatibility: Škoda Octavia IV

  • Tested fitment: Successfully tested on a Škoda Octavia IV equipped with the 10-inch infotainment system.

  • Alternative design: Based on my original Behind-Screen Storage Tray

  • Integrated hinged lid: Functional opening and closing mechanism

  • Discreet storage: Keeps sunglasses and other small everyday items out of direct view

  • Clean OEM-style appearance: Designed to blend naturally into the dashboard

  • Practical design: Makes use of otherwise unused space behind the infotainment screen

  • FDM 3D printable: Designed for home 3D printing

TWO VERSIONS – ONE PRACTICAL SOLUTION

There are two versions of this storage tray, allowing you to choose the configuration that best suits your needs.

1. Initial Version 

An open storage compartment featuring integrated ventilation openings. Link here:

https://www.makeronline.com/en/model/SKODA%20OCTAVIA%20IV%20%E2%80%93%20Behind-Screen%20Storage%20Tray%20with%20Ventilation/345349.html

2. Alternative Version – With Hinged Lid (This Model)

An enclosed storage compartment featuring a functional hinged lid for a cleaner appearance and more discreet storage.

REQUIRED PRINTING MATERIAL

IMPORTANT: Print this model using ABS or ASA .

Since this accessory is installed inside a vehicle, behind the infotainment screen, it can be exposed to elevated temperatures, especially when the car is parked in direct sunlight.

Recommended printing settings:

  • Material: ABS or ASA

  • Nozzle: 0.4 mm

  • Layer height: 0.20 mm

  • Wall count: 3–4 perimeters

  • Infill: 15–25%

  • Printer: Enclosed FDM 3D printer suitable for ABS/ASA

PLA and standard PETG are not recommended for the main printed components due to their limited heat resistance in automotive environments.

INSTALLATION INSTRUCTIONS

1. Tray installation

Slide the tray in from the right side to the left, positioning it behind the infotainment screen until it is properly seated.

2. Lid hinge installation – 1.75 mm filament required

To make the lid fully functional, you need a separate piece of 1.75 mm 3D printer filament, which acts as the hinge pin.

  • Align the hinge components of the lid and the tray.

  • Insert a piece of 1.75 mm filament through the dedicated hinge hole.

  • Push the filament through the entire hinge mechanism until it is fully inserted.

  • Check that the lid opens and closes smoothly.

  • Once everything is correctly positioned, cut off the excess filament flush with the hinge.

Important: The 1.75 mm filament is required to assemble the functional hinged lid. It is not included in the printed parts and must be supplied separately.

IMPORTANT NOTES

  • Tested on Škoda Octavia IV with the 10-inch infotainment system.

  • Verify compatibility with your specific dashboard and infotainment configuration before printing.

  • Check all clearances before final installation.

  • Make sure the lid operates freely after installation.

  • This is an independent 3D-printed accessory, not an official Škoda product.

  • Škoda is not affiliated with or endorsing this design.


SHARE YOUR PRINT

If this model is useful to you, please consider leaving a Like and Download.

If you print the model, please share a Make/Print photo and your feedback.

Your photos can help other Škoda Octavia IV owners determine whether this alternative design is suitable for their own vehicles.

Happy printing!

SUPPORT ME HERE

Ko-fi – Adrian M

Thanks a ton — and happy printing!

Tags