1 / 5
DIY Makita Track Saw Guide - Super Simple
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Super Simple Guide for a DIY Track Saw Tracksaw is just a piece of Ply or MDF with a 12mm Alu Angle attached, This…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 37
- Makes
- 0
- Views
- 1,175
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
Super Simple Guide for a DIY Track Saw
Tracksaw is just a piece of Ply or MDF with a 12mm Alu Angle attached, This print keeps the Saw from drifting away from Alu angle.
Slots into the Existing Guide slot on a Makita Saw and is secured by the stock hold down.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30
Filament: NA PETG White
Notes:
Use 4-5 walls so that the tongue of the guide is solid and so its inflexible.
Print on its side so no support is required.PLA, PETG or ABS should work.
Category: Tools