1 / 2
Battery dispenser AAA and AA - front top loading
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Battery dispenser AAA and AA - front top loading. Batteries fall down to the bottom.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 3
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Battery storage tower for aaa and aa batteries.
Printing:
line width: 0.45mm (walls are 0.9mm, so 0.4mm with fill line will also work)
Infill: 15% (most of the tower is only walls anyway)
Print one side on the flat side and then mirror image for the second side.
Glue two sides after printing. Do no use too much glue - any squeeze out will block the batteries.