Little Bones Flexi Skeleton
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print-in-Place flexi skeleton
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 75
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Meet Little Bones 💀 A spooky little skeleton with a big head and 10 moving joints!
Print it in one piece, gently free the joints, and give it some personality. A friendly wave, a silly dance, or a relaxed pose — this little desk buddy is always ready for something new.
✨ FEATURES
• 10 moving joints
• Print-in-place — no assembly required
• No glue, screws, or extra hardware
• Single-color print — no AMS needed
• Designed to print without supports
• Approximately 100 mm tall in the original printing pose
• Flat back with sculpted details on the front
🦴 MOVING JOINTS
The neck, waist, shoulders, hips, knees, one wrist, and one elbow can rotate sideways. Arrange your skeleton flat on your desk or enjoy it as a small fidget.
The joints move in the plane of the model. Little Bones is not designed to stand unsupported.
🖨 SUGGESTED PRINT SETTINGS
• 0.4 mm nozzle
• 0.20 mm layer height
• 3 walls
• 15% gyroid infill
• 4 top and 4 bottom layers
• Supports OFF
• Flat back facing the build plate
Keep all parts in their supplied positions and print at the original scale. Reducing the size also reduces the joint clearances.
💀 AFTER PRINTING
Let the build plate cool before removing the model. Support each joint close to its pivot and gently rotate it sideways to release it. Move one joint at a time and avoid forcing it beyond its natural range.
📸 Share a photo of your Little Bones — I’d love to see its funniest pose!
Designed for a little spooky fun.