Cetus X travel case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Travel case for Betaflight Cetus X drone
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Have a Betaflight Cetus X drone and thought about case for it with several batteries and other stuf like charger etc.
So I've took the idea of these plastic military cases and used same design.
The model contains the case, cap for it, platform that devides the inner space to upper for drone and lover for accessories parts.
The latch is mounted on a standard m3 x 30 screws used for speedybee stack and m3 nuts. You may also put some electric tape on screws if latches will not lock on them.
Printables:
case
cap
latch x 2
platform
TPU rubber
Additionally I've covered the surface of platform and inner space of cap with foam rubber to fixate the drone inside the case.
Printing setttings:
0.4mm extruder
4 layers for walls
4 layers for top and bottom
20% of gyroid infill
In case you may need any additional changes - you are free to contact with me.
Enjoy the print and may this print solve your usecase!