1 / 1
pulpstrusion: extruding cardboard like its aluminium — image 1

pulpstrusion: extruding cardboard like its aluminium

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

triangular cardboard extrusions!

Rating
0 / 5
Likes
1
Downloads
1
Makes
0
Views
17
Reviews
0

Updated at source:

Model information

Category
Tools
License
CERN Open Hardware Licence Version 2 - Strongly Reciprocal

To print:

The base must be printed with supports. The side that looks like a recycling icon should face down to make the top face flat. The supports do not need to be removed. The plunger has overhangs, but its a filet-caused one, and is better than how a chamfer would feel as you're pushing down on it as hard as possible.

To assemble:

Assemble as the photo shows. Then, add pulp.

To mould:

Add pulp, then press (ideally with a vice), then add more pulp, then vice again, repeat until it is at about 80% of the way till the top. Then, keep on a vice for 48 hours. Then, remove from the mould by detaching the side panels.

To make pulp, follow this: https://www.instructables.com/Recycle-Cardboard-Into-Anything-With-3D-Printing/

Tags