pulpstrusion: extruding cardboard like its aluminium
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
triangular cardboard extrusions!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- CERN Open Hardware Licence Version 2 - Strongly Reciprocal
To print:
The base must be printed with supports. The side that looks like a recycling icon should face down to make the top face flat. The supports do not need to be removed. The plunger has overhangs, but its a filet-caused one, and is better than how a chamfer would feel as you're pushing down on it as hard as possible.
To assemble:
Assemble as the photo shows. Then, add pulp.
To mould:
Add pulp, then press (ideally with a vice), then add more pulp, then vice again, repeat until it is at about 80% of the way till the top. Then, keep on a vice for 48 hours. Then, remove from the mould by detaching the side panels.
To make pulp, follow this: https://www.instructables.com/Recycle-Cardboard-Into-Anything-With-3D-Printing/
