1 / 3
Slim Fold 8 Wireless Charger Stand for TOZO W1 – Hidden Cable — image 1
1 / 3

Slim Fold 8 Wireless Charger Stand for TOZO W1 – Hidden Cable

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Slim upright Qi stand for the TOZO W1 pad, sized for a Galaxy Z Fold 8 in a case, with a hidden 45° cable exit.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
5
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

A slim desk stand for the TOZO W1 wireless charging pad, designed from scratch in FreeCAD for a Galaxy Z Fold 8 in a case. Inspired by Gricey's Wireless Charge Holder for TOZO W1: https://www.printables.com/model/1064258

  • Half the plastic of a typical stand: 77 x 134 x 111 mm, about 127 cm³.

  • Hidden cable: the pad sits with its USB-C port down. The plug enters at 45° from the bottom right and the cable runs out a slot at the back corner, hidden by the lip.

  • Phone slot is 17.3 mm wide, fitting a phone + case up to about 15.8 mm thick (a folded Fold 8 in a printed case).

  • Coil height: the pad centre is 45 mm above the shelf, lined up with the Fold 8's charging coil when it stands closed.

  • Short legs (60 mm deep, 45 mm tall) keep the footprint small.

Charges reliably through a 3D-printed case.

Print settings

  • Material: PETG

  • Orientation: upright on its base

  • Supports: only at the top of the pad pocket (painted / on build plate only)

  • Layer height 0.2 mm, 3 walls, 15% infill

Tags