1 / 3
Slim Fold 8 Wireless Charger Stand for TOZO W1 – Hidden Cable — zdjęcie 1
1 / 3

Slim Fold 8 Wireless Charger Stand for TOZO W1 – Hidden Cable

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Slim upright Qi stand for the TOZO W1 pad, sized for a Galaxy Z Fold 8 in a case, with a hidden 45° cable exit.

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
6
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A slim desk stand for the TOZO W1 wireless charging pad, designed from scratch in FreeCAD for a Galaxy Z Fold 8 in a case. Inspired by Gricey's Wireless Charge Holder for TOZO W1: https://www.printables.com/model/1064258

  • Half the plastic of a typical stand: 77 x 134 x 111 mm, about 127 cm³.

  • Hidden cable: the pad sits with its USB-C port down. The plug enters at 45° from the bottom right and the cable runs out a slot at the back corner, hidden by the lip.

  • Phone slot is 17.3 mm wide, fitting a phone + case up to about 15.8 mm thick (a folded Fold 8 in a printed case).

  • Coil height: the pad centre is 45 mm above the shelf, lined up with the Fold 8's charging coil when it stands closed.

  • Short legs (60 mm deep, 45 mm tall) keep the footprint small.

Charges reliably through a 3D-printed case.

Print settings

  • Material: PETG

  • Orientation: upright on its base

  • Supports: only at the top of the pad pocket (painted / on build plate only)

  • Layer height 0.2 mm, 3 walls, 15% infill

Tagi