1 / 5
2.4G RF RD4 LED Remote Holder (BTF-LIGHTING, FOSUO and others) — image 1
1 / 5

2.4G RF RD4 LED Remote Holder (BTF-LIGHTING, FOSUO and others)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Holder for the RD4 2.4G RF LED remote from BTF-LIGHTING, FOSUO and other LED strip kits. VHB mount; buttons work docked.

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
2
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

A small open-front holder for the RD4 2.4G RF LED remote. It holds only the bottom of the remote, so most of the face stays clear, and the buttons work while it's docked.

Which remote

This remote comes with LED strip kits and controllers sold under many brand names, including BTF-LIGHTING (mine came with their COB strip kit) and FOSUO. Look for "2.4G RF RD4" printed under the buttons. The RDX series manual lists the RD1 to RD4 at the same size, so those should fit too.

How it works

The remote drops in from the top. Small lips on each side and a short lip at the front keep it from tipping out, and they stay clear of the buttons.

The battery tray is on the bottom end, so lift the remote out to change the coin cell.

Mounting

It's made for VHB tape on a flat, smooth surface; mine is on metal. 3M Command strips or similar would also work.

  • One strip of 1 in VHB across the back, near the top.

  • Clean the surface with isopropyl alcohol and press the holder on firmly.

  • VHB gets stronger over the first day.

What to Print

  • rd4_remote_holder.stl: the holder, already in print orientation.

  • rd4_remote_holder_looser.stl: a slightly looser version, if the standard one is too snug.

  • .3mf files: PrusaSlicer projects with the settings below, set up for a Prusa MINI / MINI+.

  • .bgcode files: sliced for the Prusa MINI / MINI+ in PLA.

Printing

  • PLA, 0.20 mm layers, 3 walls, 15% infill. About 8 g.

  • Print it upright as oriented. No supports or brim needed.

How AI Helped

This is my design. I decided what it needed to do: hold the remote on a metal surface with VHB, leave as much of the face open as possible, keep the buttons usable while it's docked, and use little filament.

An AI assistant turned my measurements into the model, checked the fit and printability, executed the renders, and chcked this description.

Tags