1 / 5
Jonsbo N4 SSD block for Dual-HDD Bay
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bundle 2.5" SSDs into a solid block to fit in the N4's Dual-HDD bay.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
4, 6, 8 2.5in SSD "blocks" to fit in the 3.5in double bay.
Use the included HDD gromets and large flat fasteners.
Need 4x M3 x 6 or 8mm per SSD. 16 for the quad-drive block, 24 for the hexa-drive block, and 32 for the octa-drive block.
Print one in normal orientation and mirror a second. The parts print with the holes filled for the first 0.5mm to prevent first-layer print issues, so a 3mm drill may be needed to clear the first layer of material to be able to mount the SSDs.