1 / 3
Under-Sink Cabinet Door Pocket – Gloves, Sponge & Brush Organizer, Tape or Screws, No Supports — image 1
1 / 3

Under-Sink Cabinet Door Pocket – Gloves, Sponge & Brush Organizer, Tape or Screws, No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hexagon pocket for the inside of an under-sink cabinet door: gloves, sponge, brush. Drain holes, tape or 2 screws.

Rating
0 / 5
Likes
2
Downloads
3
Makes
0
Views
21
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Standard Digital File License

A tidy place for rubber gloves, a sponge and a dish brush – right on the inside of the cabinet door under your sink. Open the door and everything is at hand; close it and it is out of sight.

  • Closed hexagon pocket: flat front, 45° ends – nothing falls out at the sides, and the shape prints without any supports.

  • Drains: three diamond-shaped holes in the bottom let water from a wet sponge or gloves drip out.

  • Two ways to mount: strong double-sided tape (VHB) on the flat back, or 2 short countersunk screws 3.5–4 × 12 mm (for 16–18 mm doors). The screw holes sit in the strip above the pocket, so a screwdriver reaches them straight from the front.

  • Two sizes: S (84 mm wide) – gloves, dish brush, small or cut sponge (up to ~50 mm wide); L (110 mm wide) – also a standard kitchen sponge (65 × 28 mm) standing upright.

  • Pocket inside 32 mm deep, 60 mm tall; total 84/110 × 74 × 36 mm.

  • Before mounting: hold it against the door and close the door – keep it away from the hinges and below the sink bowl / top rail of the cabinet. Mount it in the middle of the door width.

Print settings

  • Orientation: lying on its side, as in the 3MF / STL (the width of the pocket is the print height).

  • 0.20 mm layer, PLA or PETG (PETG is better for a humid under-sink cabinet).

  • Bambu Lab A1, PLA, 0.20 mm (2 walls, 15% infill): S 84 mm – 1 h 21 min / 38.2 g, L 110 mm – 1 h 39 min / 48.0 g.

Designed from scratch by bezbajzlu.

Tags