Gift Wrap Cutter - Sliding Wrapping Paper Cutter for Snap-Off Blade

Slide it along the roll and the paper comes off in a straight line, no scissors. A flat foot goes under the paper, the grip body rides above it, and a 9 mm snap-off blade segment sits in a slit at the front of the thin keel between them.

How to use

• Snap one segment off a standard 9 mm blade and push it into the slit, sharp edge forward (a dot of glue if it sits loose).

• - Slip the edge of the paper into the 2 mm channel over the foot and push the cutter across the roll.

• - The roll side glides over the foot; the cut-off sheet passes under the body.

Print

• Prints standing on its rear end, as the file is oriented: a pure extrusion, so there is nothing to support.

• - The blade slit is 0.6 mm wide. If your blade is thicker, scale the model or open the slit in your slicer.

• - Layer height 0.2 mm, 3 walls, 20 % infill, no supports, about 28 g of PLA.

Files: gift-wrap-cutter.stl and gift-wrap-cutter.3mf.

Notes

• Blade not included. Keep it away from children.

• - The blade and paper in the images are render props. Images are renders of the actual file.

• - Designed with AI-assisted procedural modeling and checked automatically for printability: watertight mesh, overhang analysis and wall thickness.

• - Free under CC BY-NC-SA: print and remix it for personal use, credit the designer, no commercial use.

More from the shop

• Full collection (STL, 3MF, OBJ): https://cults3d.com/en/users/aliyalinkilic/3d-models

• - Paid favourite from the same series, Twist-Lock Round Gift Box: https://cults3d.com/en/3d-model/home/twist-lock-round-gift-box-bayonet-lid-no-supports

New designs drop every day.