Bambu (and Others) Temp / Temperature Tower Blank – G-code Included

I wasn't able to find the original source of the remix. There are hundreds of slightly different versions of this model out there. Attribution goes to the original creator, whoever they may be.

I recreated a blank version of the temperature tower using a generic STEP file I found somewhere. This way, everyone can add their own custom text to the side.

Have fun with it! :)

If you find this model useful, please leave a like! ♥

Layer change g-code 

; layer num/total_layer_count: {layer_num+1}/[total_layer_count]

; update layer progress

M73 L{layer_num+1}

M991 S0 P{layer_num} ;notify layer change

;ab hier eigener g code fuer temp tower:

;R ist der Parameter für die Zieltemperatur

;M109 S215Zieltemperatur 215 °C; wartet nur, wenn die Duese aufheizen muss

;M109 R215Zieltemperatur 215 °C; wartet beim Aufheizen und Abkuehlen

;M104 S215 setzt die Temperatur sofort ohne Warten

;M109 R215 wartet anschließend auf 215 °C

{if layer_z >= 1.05} M104 S233 M109 R233 {endif} ;setze zB 230°C, auf 230°C warten beim heizen und abkuehlen

{if layer_z >= 11.05} M104 S234 M109 R234 {endif}

{if layer_z >= 21.05} M104 S235 M109 R235 {endif}

{if layer_z >= 31.05} M104 S236 M109 R236 {endif}

{if layer_z >= 41.05} M104 S237 M109 R237 {endif}

{if layer_z >= 51.05} M104 S238 M109 R238 {endif}

{if layer_z >= 61.05} M104 S239 M109 R239 {endif}

{if layer_z >= 71.05} M104 S240 M109 R240 {endif}

{if layer_z >= 81.05} M104 S241 M109 R241 {endif}