1 / 5
Riser Feet for Revolo Tail 2 on Xone:92 / Xone:96 — image 1
1 / 5

Riser Feet for Revolo Tail 2 on Xone:92 / Xone:96

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Four small risers that lift the feet of the Revolo Tail 2 pedal, so it sits on its rubber feet and not on the Xone:96

Rating
0 / 5
Likes
0
Downloads
0
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Music
License
Creative Commons — Attribution

Small risers for the feet of the Revolo Tail 2 pedal, so it sits on its rubber feet and not on the knobs of an Allen & Heath Xone:92 / Xone:96.

THE PROBLEM
When I put my Revolo Tail 2 on my Xone:96, its feet did not touch the mixer. The pedal rested only on the knobs, so it slid every time I touched it.

THE FIX
Put one riser between each foot and the pedal. Now the pedal rests on its feet and stays in place.

SIZE
- Riser: 12 mm tall, 12 mm wide, 3.4 mm hole (for M3)
- Rubber foot: 12 mm wide, 7 mm thick 
- Total height: 19 mm (12 mm riser + 7 mm foot) 
- Tested on the Xone:96. It should also fit the Xone:92, but check the height first.

WHAT YOU NEED
- 4 x M3x20 screws (the original screws are 6 mm long, so you need longer ones) 
- 4 x M3 nuts (I put one inside each foot so the screw does not come out of the rubber)

PRINT SETTINGS 
- Print standing up
- PETG or PLA, 0.2 mm layers
- 4 walls, 50% infill or more 
- No supports 
- The plate has 4 pieces (one set)

Not affiliated with Revolo or Allen & Heath.

Tags