Control Case for tft35 e3 v3.0 - MPCNC
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a way to mount the TFT35 Screen for my MPCNC. I didn't care much for the ones that I found (I do not like…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 46
- Makes
- 0
- Views
- 368
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I needed a way to mount the TFT35 Screen for my MPCNC. I didn't care much for the ones that I found (I do not like press fit cases), so I designed this. Took me ~4 prints to get right, but I think this one is a killer. It is designed to be screwed into the frame of my MPCNC, but it can be moved according to what you need. I designed the board to be screwed through the top, through the board, and into heat set inserts in the bottom. to attach the bottom to the base, align the pegs, and use simple m3 bolt and nut to held together. I suggest printing with 4-5 layer wall thickness to accommodate the heat inserts.
Everything was designed in tinkercad.
I used this for the case for the SKR 1.2: https://www.thingiverse.com/thing:3829730
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
50
Filament: Polymaker Polyflex TPU Black
Category: Parts