Cannelure Planter, Self-Watering Herb Pot with Water Level Float
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Self-watering herb planter with fine vertical grooves and a Float that shows the water level. XS and S, no supports.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A self-watering herb planter wrapped in the Cannelure pattern: fine vertical grooves over a plain band at the base. The Base holds the water, the Planter screws in above it and holds the soil, and a Float rises and falls in its conduit to show the water level at a glance.
Sizes

Parts
Base: the Cannelure outer body. It holds the water.
Planter: holds the soil and screws into the Base.
Float: sits in the conduit and shows the water level.
Each size has its own Float, sized to its height. The Funnel is a separate model that works with every size.

Assembly
Drop the Float into the conduit in the Planter.
Screw the Planter into the Base.
Optional: thread a short cotton rope through one of the floor ports.
Add soil and your plant or seeds.
Water through the Funnel.

Print settings
3 walls on the Base, 2 on the Planter
15% lightning infill
No supports, no brim
Plate 1 holds the Base and the Planter. Plate 2 holds the Float, printed in vase mode with an outer brim; both are already set in the file. Print the Float in a contrasting colour.
The Adapted Funnel
This specialized funnel fits the D-shaped watering channel of the planter.
Adapted Interface: shaped to fit the D-shaped, integrated watering channel.
Integrated Venting: a small channel at the interface gives air a separate path out while you water.
