Counting matching models…
This is a simple windowsill extension to have a larger surface/shelf for plants. Fusion 360 file included to modify windowsill width. Seize: 170*150 Current cut out for windowsill thinness is 15mm
Headphone hook to be mounted on the windowsill without screws.
Some of my succulents had gotten pretty leggy, so I designed this propagation tray to fit on my windowsill. It's designed to be a quick print, printed in vase mode. My settings (the 3mf and gcode reflect this): PETG 0.6mm nozzle 0.3mm…
A perfectly small and easy to print watering can for indoor potted plants. It'll print fine without but I recommend slowing print speed towards the top of the spout due to very quick layers.
This is a modular frame for building your own compact grow tent for the windowsill , ideal for seed starting and early plant growth indoors. Designed to fit standard windowsills, this structure uses transparent cling film or any…
Hello this is my windowsill NFT hydroponics system V2….V1 was a contrived leaky mess, let’s forget about it. I have been using this successfully for over a year (minus the cold winter months) The goal of this project is: Cut main “rail”…
I designed this model to be 210mm wide but it turned out to be too big for my Ender 3 v2 bed, so I shrunk only the X axis to 205mm & it fits just right. I have included the unmodified STL, so I suggest shrinking it if you're on the Ender…
A self-watering windowsill planter with a hex pattern for cacti or other small houseplants.
Small little mount that can be used to mount a plank on top of a radiator. Use small screws to mount the brackets on the plank. Can be printed without supports but best to use a filament that is heat-resistent otherwise it will deform.
For my Window Sill, the original PortaSplit mount does not work, as the sill is far too deep. In order to still use the original mount, I designed different feet, so the mount can just rest ontop the sill. For my Windowsill, the distance…
Deutsch Für den "Homematic IP Funk-Temperatur- und Luftfeuchtigkeitssensor" HmIP-STHO bzw. HmIP-STHO-A habe ich dieses kleine Modell konstruiert um es außen am Fensterbrett in die Wasser-Ablaufrinne einzuklemmen. Der Keil (wird unten…
EN: Modular bird spikes (for window sill). Print without supports. CZ: Modulární hroty proti ptákům (na okenní parapet). Tiskne se bez použití podpor.
Remix of the original holder , but with a foot with magnets for attaching to a metal sheet windowsill. Using six 5x3 millimeter magnets. Print the top and and three of the middle thing and glue together. Insert and glue magnets.
If your windowsill is blocking the air circulation of the heating and your room is warming up too slowly, this vent grid may be for you. Print out as many pieces you need. Dimensions are: 23 cm x 13 cm
I needed to find a way to hang a heavy laundry bag on my windowsill and none of the alternatives worked very well – either not enough relief on the hook to make sure the bag didn't slide off, or not enough holding force, or both. so I…
Do you want to fill your windowsill with plants, but traditional round planting pots fit poorly? This is your solution for a better soil per space ratio without worrying about round pots falling over the edge. Printed from Prusament…
A couple of simple, small planters for herbs and succulent plants. These are designed to go on a windowsill where they can get ample light. Use them for fresh herbs for cooking or to add some charm to any room with colorful succulents!…
Holder for steel profile 15x15mm Material: ASA
This box was designed to be 90mm deep (the depth of the windowsill, and 100mm high (the height of the basic black plastic pots the plants come in. Built as a request from my wife to stop the pots leaking onto the windowsill, and to give…
DE: Fensterbrett-Haken. Für Fensterbretter mit 30mm Dicke geeignet. . . . . EN: Windowsill Hook. Suitable for window sills with a thickness of 30mm.
Customize this model automatically as you need using Fusion 360's parameters. I fully described them, but you can also just change them at random to see what controls what. The one I provided (and printed) just about fits in the standard…
This sponge holder clips to my window sill and drains into the sink.
I designed this planter pot to match my windowsill profile since I was running out of counter space. I also was running out of white filament (Overture White PLA) and switched to green filament (Paramount St. Andrews Green PLA). The tray…
Praktická pěstební miska určená pro výsev a předpěstování sazenic na okenním parapetu. Miska je navržená pro pěstební kostky 22×22 mm , obsahuje průhledný kryt pro udržení vlhkosti, nožičky pro zvýšení celé sestavy a zalévací otvor pro…
This is a hook to mount Gateways, routers, switch, …. on a 30mm thick Windowsill. I printed it in white PLA a while ago, still works fine for me.
A custom-fit windowsill shelf / glasses holder with 159mm x 51mm shelf area (excluding curves). Notes Print tester.stl if you want to see if the outline lines up with your windowsill moulding .f3d and .step files included in case you wish…
I designed this because I needed a hook under my bathroom window to hang my laundry bag. Could not find one strong enough and that wouldn't deform in the long run. This is the 4th iteration and is really strong. It also has a screw hole…
It's hot and in your Room but Could outside ? And the only Thing you got is one of those free Standing Fans Well look no more now you can get that Hot Air out and the cold Air in. ⚙ Printing settings Material: PETG / ABS / ASA Layer high:…
The holder is very easy to print, but because of the small footprint, a brim might be necessary.As material I would recommend PETG because of the flexibility, but I have used PLA, which also works well. You will need a 15mm x 3mm magnet.…
when placing indoor plants on the windowsill in winter, additional lighting with phytolamps is necessary
I had the issue that my cats started to toss down flower boxes/pots from my windowsill. And that my MIL started to water the flowers and toss the pot so far to the back that the automated window covers stuck on the edge of the flower…
LoRa / Meshtastic Antennenhalter für die Fensterbank – ohne Bohren, spurlos No-Drill Windowsill Mount for a LoRa / Meshtastic Antenna 🇩🇪 Deutsch Warum es das gibt Ich wollte eine LoRa-Antenne draußen vor dem Fenster aufstellen – mit…
I printed it with a MK3s. a little support is needed for printing
Windowsill Ashtray designed for spaces where a traditional round ashtray looks awkward or does not fit properly. Its long, rectangular profile sits neatly on a windowsill, ledge, or narrow surface while still holding a good number of…
The model is conveniently exported to STEP in order to minimize visible faces You can use Fusion 360's parameters tab to customize the cover based on the diameter of the curve and the desired length , as described Tested to print fine…
There are three files; they are all the same, aside from length, since the windowsill exposure length can vary. The first one is 39.2mm from the wall to the end of the windowsill, then +10mm and +50mm. For how to acquire the desired…
I designed a holder for a foam edge protector. I didn't want to stick the edge protector to the windowsill, so I designed a clamp closure. With a practical shelf for a TonieBox. Suitable edge protection can be purchased here:…
Dimensions: For windowsill with 30mm thickness and >=25mm depth. Onshape CAD files with configurable dimensions (variables tab):…
Print the windowsill wand and heads of choice. Use 3M 8lb or stronger velcro pads to attach different heads. Glue sponges, cleaning pads, scouring pads, or even bristles with superglue to the heads.
The perfect label holder for your herb garden on the windowsill. Label holder size: 28x11mm for labeling. Insertion depth into the soil: 65mm (recommended: 40mm). It has a base plate for added stability. P.S. The print is upside down in…
We have cats, and they love being on the windowsill.. i think you can guess what happend. so i made some guardrails to at least try do make fewer pots and plants to see their end on the floor. the mount is for 20mm windowsills, use the…
A coat hanger and umbrella holder designed to be firmly taped to a windowsill. This makes it easy/nondestructive to install and detach. I didn't have a good spot to put my coat(s) or damp umbrella at work, so I made one. Use a reasonable…
I've upgraded my FlightAware antenna for a 60cm version from pi-hut ( here ) and needed a way to mount it vertically whilst I sort out something for the roof. I didn't want to stick anything to my window as is required for other mounts on…
I designed a holder for a foam edge protector. I didn't want to stick the edge protector to the windowsill, so I designed a clamp closure. With a practical shelf for a TonieBox. Suitable edge protection can be purchased here:…
There are three files; they are all the same, aside from length, since the windowsill exposure length can vary. The first one is 39.2mm from the wall to the end of the windowsill, then +10mm and +50mm. For how to acquire the desired…
Praktická pěstební miska určená pro výsev a předpěstování sazenic na okenním parapetu. Miska je navržená pro pěstební kostky 22×22 mm , obsahuje průhledný kryt pro udržení vlhkosti, nožičky pro zvýšení celé sestavy a zalévací otvor pro…
A coat hanger and umbrella holder designed to be firmly taped to a windowsill. This makes it easy/nondestructive to install and detach. I didn't have a good spot to put my coat(s) or damp umbrella at work, so I made one. Use a reasonable…
We have cats, and they love being on the windowsill.. i think you can guess what happend. so i made some guardrails to at least try do make fewer pots and plants to see their end on the floor. the mount is for 20mm windowsills, use the…
This 3D-printed toilet paper holder is designed for easy mounting on a windowsill. The compact and sturdy design allows for convenient access to toilet paper without taking up wall space. Perfect for bathrooms with limited wall mounting…
Windowsill Cable Holder Made specifically because I have no plug near my bed and have a longer cable that I have to pull up evey night. I made this cable holder to clip securely against a windowsill, keeping power plugs or cables in place…
Printed from ABS. Optimized (wall thicknesses) for 0,25mm Draft preset in Prusa-Slicer, so just use that and it prints in just less than 30min.
Height from radiator; 4,5cm Radiator lenght; 10cm Gap between; 1cm
Prints in around 7 mins. While the original is press fit, this replacement has shorter guide prongs and is intended to be attached with a few small dots of glue or silicone. I used the default print settings, but if you want to cut it to…
I printed this awesome vase for my succulent, but it was too large for my windowsill. Hence, this small support. You'll need a bit of superglue (CA glue) and double-sided tape. Glue the rim to the base and apply double-sided tape on the…
I am using the Parametric cable organizer everywhere in the house, it is a good and working design. The problem was I have a 40,7 mm windowsill, where I was not able to use screws. So, I made a little remix, so I cab clip it over the…
Sponge slots are 70 x 50mm. This is quite straight forward, it is a holder for your dish washing sponges. It holds them up to dry and keeps them from cluttering the place. We live in hard water area, so capturing the water and soap from…
