1 / 8
Upgraded Ridgid R4512 Rip Fence stop block (hook) — image 1
1 / 8

Upgraded Ridgid R4512 Rip Fence stop block (hook)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replaced stock back stop with this custom one to prevent moving of the rip fence tail

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
12
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Upgraded stock back hook to more wider one, prevent moving at the and of the rip fence, especially when you cut wide stocks like plywood or mdf sheets. I add 20 mm from each side to the original dimensions so the width grows from 26mm in stock to 66mm in my version (RED on the photos). Now the rip fence is much more stronger and stable.

I print it  with PET-G in 75% infill, .2layers, 4 walls/tops/bottoms with supports on the bottom only,

Its easy to replace: unscrew 2 screws and one 13mm nut and assemble back with new part.

It designed and tested on the Ridgid R4512 table saw. Possibly, it should fit the Ridgid 4520 too.

Tags