Upgraded Ridgid R4512 Rip Fence stop block (hook)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaced stock back stop with this custom one to prevent moving of the rip fence tail
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 12
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Upgraded stock back hook to more wider one, prevent moving at the and of the rip fence, especially when you cut wide stocks like plywood or mdf sheets. I add 20 mm from each side to the original dimensions so the width grows from 26mm in stock to 66mm in my version (RED on the photos). Now the rip fence is much more stronger and stable.
I print it with PET-G in 75% infill, .2layers, 4 walls/tops/bottoms with supports on the bottom only,
Its easy to replace: unscrew 2 screws and one 13mm nut and assemble back with new part.
It designed and tested on the Ridgid R4512 table saw. Possibly, it should fit the Ridgid 4520 too.